January 28, 2013

Michaud begins five-day paper industry tour in Madison

'I primarily want to highlight the issue of Canadian subsidies, but different mills have different issues as well. There are concerns with reliable transportation and energy issues,' US Rep. Mike Michaud says at Madison Paper Industries mill

By Rachel Ohm rohm@centralmaine.com
Staff Writer

MADISON -- U.S. Rep. Mike Michaud toured the Madison Paper Industries mill on Monday, pledging to help paper mills across the state that could be affected by Canadian subsidies to a Nova Scotia paper mill.

click image to enlarge

U.S. Rep. Mike Michaud, left, listens to Jeremy Vigue, seated in a paper machine control room, at the Madison Paper Industries mill, during a tour on Monday. Standing are, from left, employee Troy Bonnevie, Michaud, and employees Mike Croteau and Craig Hunnewell.

Staff photo by David Leaming

click image to enlarge

U.S. Rep. Mike Michaud examines a huge roll of finished paper made at the Madison Paper Industries mill in Madison, at the start of a statewide tour of mills, on Monday.

Staff photo by David Leaming

Additional Photos Below

It was the first day of a five-day, 850-mile tour of the state's pulp and paper industry in which the congressman said he hopes to learn about issues relevant to one of the state's most important industries.

The industry employees 7,300 people statewide and generates about $470 million in payroll annually, according to the Maine Pulp and Paper Association.

"I primarily want to highlight the issue of Canadian subsidies, but different mills have different issues as well. There are concerns with reliable transportation and energy issues," said Michaud.

Michaud, 58, worked at Great Northern Paper Company in East Millinocket for 29 years. He recently sent a letter to U.S. Trade Representative Ron Kirk on the issue of the Pacific West Company in Nova Scotia buying an old paper mill with the help of subsidies from the Canadian government.

The subsidies, which would help the company buy and operate the former New Page Port Hawkesbury paper mill, could put Maine paper mills at a disadvantage at a time when the paper industry is already facing challenges from other international competition, said Michaud.

The Canadian mill closed in 2011, said Madison Paper Industries president and chief executive officer Russ Dreschsel. Since then, the paper industry has experienced a 20 percent decrease in demand for product, he said.

The subsidies and subsequent re-opening of the Canadian mill could be a threat to the sales of the Madison mill, which makes the same kind of paper, said Dreschel.

"It's definitely an issue that would affect any company making light-weight and super-calendered paper. There is no doubt about that," said Dreschsel.

The Madison mill employs between 220 and 230 people and has been an important part of the community and local economy since it opened in 1981, said Dreschel, who has been there since 1988 with the exception of two years he spent working in a German paper mill.

On Monday, Dreschel led Michaud and a small entourage on a tour of the mill, which produces super-calendered paper, a dense paper that is used for flyers and magazine sheets.

Between 20 and 24 reels of paper measuring 300,000 feet in length by 282 inches across and weighing about 30 tons each are produced every day. The mill operates 24 hours a day, 365 days a year, said Dreschel.

"A lot of people work here who live locally. It's also important to the economy and supports other local businesses," said Brady Pierce, 43, a millwright who has worked at the Madison mill for eight years.

The mill converts wood from spruce and fir trees into a pulp that is mixed with water and calcium carbonate, which acts as a filler and also brightens the color of the paper. Unlike the larger Sappi Fine Paper mill in nearby Skowhegan, wood at the Madison mill is turned into pulp mechanically rather than through chemicals that break down the fibers, said Dreschel.

The mixture is condensed once the calcium carbonate and other binding agents have been added the water is squeezed out and the pulp is sent through a series of 47 heated cylinders that give off steam.

The paper is wound on a reel and then processed through the supercalendar, a machine that polishes the paper and gives it the glossy cover that are used for flyers and magazine sheets.

"That's when it actually looks like the paper you'll see when you read something like the New York Times magazine," said Dreschel.

(Continued on page 2)

Were you interviewed for this story? If so, please fill out our accuracy form

Send question/comment to the editors


Additional Photos

click image to enlarge

Madison Paper Industries President and CEO Russ Drechsel, right, shows grades of paper from a finished roll made at the Madison mill during a tour for Congressman Mike Michaud, left, on Monday.

Staff photo by David Leaming

  


Further Discussion

Here at OnlineSentinel.com we value our readers and are committed to growing our community by encouraging you to add to the discussion. To ensure conscientious dialogue we have implemented a strict no-bullying policy. To participate, you must follow our Terms of Use.

Questions about the article? Add them below and we’ll try to answer them or do a follow-up post as soon as we can. Technical problems? Email them to us with an exact description of the problem. Make sure to include:
  • Type of computer or mobile device your are using
  • Exact operating system and browser you are viewing the site on (TIP: You can easily determine your operating system here.)